| Customization: | Available |
|---|---|
| Material: | PSU |
| Kind: | Transparent Plastic |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Material | Brand | Size (Rod) | Services | Application |
| PSU | MBH | Dia. 4 /5/6/7/8/9/10/13/16/18/22/ 25/26/40/45/50/55/60/65/70/75 /80/85/90/95/100/120/170/230/260 or customized |
sheet/rod/profile extrusion and machining |
medical, pharmaceutical, |
Udel® P-1700 polysulfone (PSU) is a tough, rigid, high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.
These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel® P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.
The resins comply with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.
Transparent: Udel® P-1700 CL 2611 CMP
Transparent: Udel® P-1700 NT 06
Transparent: Udel® P-1700 NT 11
Opaque Black : Udel® P-1700 BK 937
Opaque White: Udel® P-1700 WH 6417
Opaque White: Udel® P-1700 WH 7407
Opaque Gray: Udel® P-1700 GY 8057
| heological properties | Value | Unit | Test Standard |
| Melt volume-flow rate, MVR | 13 | cm³/10min | ISO 1133 |
| Temperature | 190 | °C | ISO 1133 |
| Load | 2.16 | kg | ISO 1133 |
| Molding shrinkage, parallel | 2.0 | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.9 | % | ISO 294-4, 2577 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 3100 | MPa | ISO 527-1/-2 |
| Yield stress | 71 | MPa | ISO 527-1/-2 |
| Yield strain | 17 | % | ISO 527-1/-2 |
| Nominal strain at break | 30 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | 2800 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | 1600 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 300 | kJ/m² | ISO 179/1eU |
| Charpy impact strength, -30°C | 280 | kJ/m² | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 9 | kJ/m² | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 8 | kJ/m² | ISO 179/1eA |
| Puncture - maximum force, +23°C | 2000 | N | ISO 6603-2 |
| Puncture energy, +23°C | 3 | J | ISO 6603-2 |
| Thermal properties | Value | Unit | Test Standard |
| Melting temperature, 10°C/min | 178 | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 93 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 160 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 155 | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 100 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 100 | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 | mm | IEC 60695-11-10 |
| Yellow Card available | Yes | - | - |
| Burning behavior at thickness h | HB | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 | mm | IEC 60695-11-10 |
| Yellow Card available | Yes | - | - |
| Oxygen index | 22 | % | ISO 4589-1/-2 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 3.8 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.8 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 90 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 90 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 2E12 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | 4E14 | Ohm | IEC 62631-3-2 |
| Electric strength | 44 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 600 | - | IEC 60112 |
| Other properties | Value | Unit | Test Standard |
| Water absorption | 1.3 | % | Sim. to ISO 62 |
| Humidity absorption | 0.2 | % | Sim. to ISO 62 |
| Density | 1420 | kg/m³ | ISO 1183 |
){kind=link}