Pure Nature New Virgin PPS Polyphenylene Sulfide Machining Parts PPS Square Target

• Customization: Available
• Material: PPS
• Kind: Hard Plastic Rods
• Model NO.: MBH-PPSM-001
• Water Absorption: ＜0.01%
• Contraction Percentage: 0.4%~1.4%
• Tensile Strength: 81~130MPa
• Color: Nature Beige
• Size: Max 260mm Dia. Per Customized
• Machining Service: Yes
• Advantage: High Performance
• Modified Service: Yes
• Application Filed: Medical / E/E / Semiconductor / Aerospace etc
• Transport Package: as Per Customer′s Request
• Specification: as per customer′s request
• Trademark: MBH
• Origin: China
• HS Code: 3926909090
• Production Capacity: 500000 Sets Per Year

Product Description

 

Product Description

 

Factory Direct Sales Of Natural Color Black Anti Static Can Be Zero Cut CNC Engraving PEEK Polyetheretherketone bar Rod

Material	Brand	Size (Rod)	Services	Application
PPS/PPSU	MBH	Dia. 4 /5/6/7/8/9/10/13/16/18/22/ 25/26/40/45/50/55/60/65/70/75 /80/85/90/100/130/160mm or customized	sheet/rod extrusion and machining and plastic modified services	medical, pharmaceutical, and semi-conductor, Aerospace, Auto etc.

 

Polyphenylene sulfide (PPS) is a semi-crystalline, high-temperature engineering thermoplastic. It is a rigid and opaque polymer. It has a high melting point (280°C). It consists of para-phenylene units alternating with sulfide linkages.

it provides excellent properties like:

• Exceptional mechanical strength
• Dimensional stability
• Electrical insulation properties
• Resistance to flame, chemical, and high temperature

 

Properties

•  

1. Crystal Structure and Physical Properties: PPS is a semi-crystalline polymer.
   • The unit cell is orthorombic (a=0.867 nm, b=0.561 nm, c=1.026 nm)
   • The heat of fusion for an ideal PPS crystal was calculated as 112 J/g
   • Depending on the thermal history, molecular weight, and cross-linked status (linear or not) the degree of crystallinity ranges from 0.30 to 0.45%
   • Amorphous and crosslinked PPS can be prepared by:
     • Heating the material above the melting temperature
     • Cooling it to around 30°C below the melting temperature, and
     • Holding it for several hours in the presence of air


2. Dimensional Stability: PPS is an ideal material of choice to produce complex parts with very tight tolerances. The polymer exhibits excellent dimensional stability even when used under high temperature and high humidity conditions.


3. Electrical Properties: PPS has excellent electrical insulation properties. High volume resistivity and insulation resistance are retained after exposure to high-humidity environments. It has a less pronounced O₂ sensitivity. It can be conveniently doped to get high conductivity.


4. Thermal Properties and Fire Resistance: PPS is a high-temperature specialty polymer. Most of the PPS compounds pass UL94V-0 standard without adding flame retardant. PPS can be resistant at 260°C for a short time and used below 200°C for a long time.


5. Mechanical Properties: PPS has high strength, high rigidity, and low degradation characteristics even in high-temperature conditions. It also shows excellent fatigue endurance and creep resistance. PPS has a lower elongation to break, a higher cost, and is rather brittle. Today, PPS is available in different forms and grades such as compounds, fibers, filaments, films and coatings.


6. Chemical Properties: PPS has good chemical resistance. If cured, it is unaffected by alcohols, ketones, chlorinated aliphatic compounds, esters, liquid ammonia, etc. It also tends to be affected by dilute HCl, nitric acids, and concentrated sulfuric acid. It is insensitive to moisture and has good weatherability.

Property (Unit)	Test Method	Unfilled	Glass Reinforced	Glass-Mineral Filled*
Filler Content (%)		-	40	65
Density (kg/l)	ISO 1183	1.35	1.66	1.90 - 2.05
Tensile Strength (MPa)	ISO 527	65-85	190	110-130
Elongation at Break (%)	ISO 527	6-8	1.9	1.0-1.3
Flexural Modulus (MPa)	ISO 178	3800	14000	16000-19000
Flexural Strength (MPa)	ISO 178	100-130	290	180-220
Izod notched Impact Strength (kJ/m^2)	ISO 180/1A		11	5-6
HDT/A (1.8 MPa) (°C)	ISO 75	110	270	270

 
 

 

Detailed Photos